Please review the following changes and additions to the "SONAR V-Studio 100 Getting Started" guide.

• Page 19, "To Install SONAR"

For users wishing to use the VS-100 with SONAR VS on Windows, it is necessary to install the VS-Production Pack before installing SONAR VS. The VS Production Pack installs the VS-100 control surface component which allows you to use the VS-100 hardware to control SONAR VS. Without this installed, you will not be able to control SONAR VS with the VS-100 hardware.

To Install the VS Production Pack and SONAR VS

1. Start your computer.
2. Close any open programs that are running.
3. Place the SONAR V-Studio 100 Installation DVD-ROM into your disc drive.
4. The "VS Production Pack" AutoRun will appear if you have AutoRun enabled. 
5. If the AutoRun appears, proceed with the on screen installation instructions and move on to Step 7.
6. If the AutoRun does not appear:
7. Navigate to My Computer
8. Right-click on your DVD-ROM titled "VS-100 DVD" and click "Explore"
9. Right-click on VS_Production_Pack_Setup.exe and click "Open"
10. Proceed with the on screen installation instructions.
11. When arriving on the Select Components screen, make sure you have selected to install the "VS-100 Control Surface plug-in".
12. When you arrive at the "Completing the VS Production Pack Setup Wizard" screen, make sure you have placed a check next to "Launch SONAR VS Installer" See the picture below:

1. Click [Finish]
2. The "Welcome to SONAR VS Setup Wizard" will appear. Follow the on screen installation instructions.
3. When arriving at the Completing the SONAR VS Setup Wizard screen, click [Finish].

Both the VS Production Pack and SONAR VS are now installed. At this point, continue on to the Initial Settings section found on page 21 of the V-Studio 100 Getting Started Guide. This guide can be found on our website here.