Modules

Channel strip controls are grouped into various modules that can be shown/hidden. The following modules are available:

Input Gain module

EQ Plot module

FX Bin module

Sends / Bank / Patch module

MSR module

Pan Control module

Volume module

Icon module

In / Out module

To show/hide a module

Click the Modules menu in the Console view and choose the desired module.

Figure 340. Console view Modules menu.

Input Gain module

The Input Gain module lets you adjust the pre-volume input gain and pan (buses only).

Figure 341. Input Gain module.

A. Input gain/trim B. Input pan

For information about using input gain, see Adjusting volume trim.

EQ Plot module

The EQ Plot module lets you adjust the per-track equalization curve. To access additional equalizer controls, double-click the EQ plot.

Figure 342. EQ Plot module.

A. EQ on/off B. EQ plot

For information about using the per-track Sonitus EQ in Music Creator 6 Touch, see Using the per-track EQ.

FX Bin module

The FX Bin module let’s you insert real-time plug-in effects in tracks and buses.

Figure 343. FX Bin module.

A. Scroll up B. Scroll down C. Insert plug-in D. Enable/disable plug-in E. Plug-in name F. Effect output interleave indicator (mono or stereo).

For information about using real-time effects, see Using real-time effects.

Sends / Bank / Patch module

The Sends / Bank / Patch module provides different controls for audio tracks, buses and MIDI tracks.

For audio tracks, you can create effects sends, submixes, headphone mixes, etc.

For MIDI tracks you can choose the bank, patch and channel, which determine the instrument sound that will be used for playback.

Figure 344. Sends / Bank / Patch module.

A. Scroll up B. Scroll down C. Insert Send D. Send number E. Send destination F. Send level G. Pre/post toggle H. Send enable/disable I. Send pan J. Bank K. Patch L. Channel

For information about using sends and MIDI Bank, Patch and Channel settings, see Routing and mixing digital audio and Choosing the instrument sound (bank and patch).

MSR module

The MSR module lets you set various track states, including mute, solo and arm for recording.

Figure 345. MSR module.

A. Mono/Stereo B. Phase Invert C. Read Automation D. Write Automation E. Mute F. Solo G. Arm for recording H. Input Echo I. Link left and right channel faders (mains only)

For information about track states, see Track-by-track playback.

Pan Control module

The Pan module lets you adjust the channel strip’s pan setting.

Figure 346. Pan Control module.

For information about panning, see Adjusting volume and pan.

Volume module

The Volume module lets you adjust the channel strip’s playback or monitoring level. The meter lets you monitor the channel strip’s playback or recording level. The peak meter value updates during playback to show the highest peak level reached.

Figure 347. Volume module (also showing MSR and Pan Control modules).

A. Volume fader B. Peak value C. Link faders (Mains only)

For easy identification, track fader thumbs are black, bus fader thumbs are blue, and mains fader thumbs are red.

Note: Main out faders can be linked using the Link button . This allows you to adjust both the left and right channel at the same time.

For information about setting levels, see Adjusting volume and pan.

For information about using meters, see Metering.

Icon module

The Icons module lets you assign a graphic icon to the channel strip. This makes it easy to identify tracks and buses visually.

Figure 348. Icon module.

A. Track/bus icon

For information about using track icons, see Track icons.

In / Out module

The In / Out module lets you assign an input and output to the channel strip. The Input device is used for recording and the Output device is used for playback.

Figure 349. In / Out module.

A. Input B. Output

For information about assigning inputs and outputs, see Assigning Inputs & Outputs.

 

See:

Channel strips

Console view menu

The Console view interface

Customizing the Console view

Using the Console view

Console view