Routing in surround

Tracks can send output to a surround bus, the Surround Main, or a hardware output. If a track is routed to a surround bus or the Surround Main, it has surround meters and a surround panner. You can route any track or bus to another bus, the Surround Main or a hardware out. However, you are prevented from creating a signal loop by routing the signal back into a bus that is already in the signal flow. The following table lists how each of these routing options affects the signal.

 

Table 173.  

Signal Flow	Result
Track to stereo bus	No change
Mono track to surround bus	Mono signal is routed to both Left and Right channels of surround format. You can change the routing to other surround channels by using the surround panner on the track.
Stereo track to surround bus	Stereo left channel is routed to Left channel of surround format; stereo right channel is routed to Right channel of surround format. You can change the routing to other surround channels by using the surround panner on the track.
Track to hardware output	No change
Stereo bus to stereo bus	No change
Stereo bus to surround bus or the Surround Main	Stereo left channel is routed to Left channel of surround format; stereo right channel is routed to Right channel of surround format. You can change the routing to other surround channels by using the surround panner on the stereo bus.
Stereo bus to hardware output	No change
Surround bus to stereo bus	Surround channels are downmixed to stereo
Surround bus to surround bus or the Surround Main	No change

To assign a track to a surround bus or surround main

Click in the track’s Output field and select a surround bus, the Surround Main, or New Surround Bus as an output.

 

See:

Downmixing